LOADING

 

Inverter selection

help
help
help
Liquid cooled version of HV-500 series inverter. This is recommended to use due to the efficiency of the liquid cooling. It can provide longer continious power periods than the air cooled.
Interlock: This option is an additional connector on the housing of the inverter. It provides information if the high voltage cables are connected or not. Please click here for more information.
Active air cooled version of HV-500 series inverter. There are 2 pcs of high power fans installed onto the heatsink to provide sufficient cooling for the inverter.
Interlock: This option is an additional connector on the housing of the inverter. It provides information if the high voltage cables are connected or not. Please click here for more information.
Passive air cooled version of HV-500 series inverter. There is no installed fans onto the heatsink. The user must provide sufficient air flow for the inverter.
Interlock: This option is an additional connector on the housing of the inverter. It provides information if the high voltage cables are connected or not. Please click here for more information.

Diagnostic Tool

NOTE: This diagnostic tool is required for configuring the inverter. You must have at least one to use the inverter. If you do not have, you cannot connect to the inverter via PC.

High Voltage Harness

Select connector type help
Connector assembly help
Please click on if you need the connectors to be assembled with the cable. If unticked, the connector will not be assembled. We will only pack the untouched connectors.
Cable length help
Please specify the length of the cable. If 0 meter, no cables will included.
Cable shoe size
Cable shoe assembly help
Please click on if you need cable shoe to be assembled with the cable. If unticked, the cable shoe will not be assembled. We will only pack the untouched cable shoe, if selected any.
Quantity of this configuration

Low Voltage Harness

TE Connectivity AMPSEAL 770680-1 with crimp pins (770520-1) HV-500 main harness connector.
Main wiring harness for HV-500 inverters. The package includes 23 pcs of pre-crimped 2 meters long wire, 1 pcs of TE connectivity harness connector and CAN connector for diagnostic tool.

Motor Sensor Connector

You will only get the compatible SOURIAU UTS6JC12E14P motor sensor connector. You need to solder the wiring of the encoder.
You will get the RLS RM44SI sensor with soldered HV-500 compatible connector (SOURIAU UTS6JC12E14P).
This device splits one encoder signal into 2 signal. This device allows to connecto 1 motor with 2 inverters (dual inverter operation). The device comes with 1,5 meter harness and neccessary connectors. For more information, please contact us: info@drivetraininnovation.com.
This device splits one encoder signal into 2 signal. This device allows to connecto 1 motor with 2 inverters (dual inverter operation). The device comes with 1,5 meter harness and soldered RLS RM44 SI 13-bit encoder. For more information, please contact us: info@drivetraininnovation.com.
0

Billing information

Shipping information

Company Details

Drivetrain Innovation Kft.
2750 Nagykőrös, Eötvös Károly utca 32.
VAT number: 26712402-2-13
EU VAT number: HU26712402
Registration number: 13-09-199254

Contacts

E-mail: info@drivetraininnovation.com
Office: H-6035 Ballószög, hrsz. 60/12
GPS: 46.857943, 19.556977

© 2020 Drivetrain Innovation Kft. WEBSITE c/o OUTCLASS ™