The DTI HV-850 liquid cooled inverter kit contains basic components which are needed for using the inverter for first use.
DTI HV-850 liquid cooled inverter kit contains:
<ul>
<li>1 x DTI HV-850 liquid cooled version</li>
<li>1 x DTI COM diagnostic tool</li>
<li>1 x OBD connector for diagnostic connection</li>
<li>1 x Main wiring harness for single HV-850 operation</li>
<li>1 x Motor position sensor connector - SOURIAU UTS6JC12E14P</li>
<li>1 x User manual USB flash drive</li>
<li>2 x Pipe clamp for hose</li>
<li>5 x Amphenol Surlok straight connector (selectable diameter)</li>
<li>1 x Inverter grounding wire</li>
</ul>
---FILES--- 
[Manuals] 
User manual REV.4 V1.2 === https://drive.google.com/file/d/12_XQR_gYO0YNasvg3SZ2IUfjVQkZUk0s/view?usp=sharing 
CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
[3D] 
HV-850 REV.4 CAD file === https://drive.google.com/file/d/12Oh7aHI6RBWXqomTpCJxbJ4bwtpSgvrx/view?usp=share_link 
[Firmware] 
DTI firmware 5.0 (CAN tool 1.40) === https://drive.google.com/file/d/1uPPmC6M78wEf0uILwRBV3NvFjxg8Hney/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view

Inverter Base kit

HV-500 LC AC side

HV-500 LC DC side

surlok2

Low voltage harness

UTS6JC12E14P_500X400

TORRO 9 W1 12-22

diagnostics

DTI HV-850 liquid cooled inverter base kit

DTI HV-850 liquid cooled inverter with necessary accessories

The DTI HV-550 liquid cooled inverter kit contains basic components which are needed for using the inverter for first use.
DTI HV-550 liquid cooled inverter kit contains:
<ul>
<li>1 x DTI HV-550 liquid cooled version</li>
<li>1 x DTI COM diagnostic tool</li>
<li>1 x OBD connector for diagnostic connection</li>
<li>1 x Main wiring harness for single HV-550 operation</li>
<li>1 x Motor position sensor connector - SOURIAU UTS6JC12E14P</li>
<li>1 x User manual USB flash drive</li>
<li>2 x Pipe clamp for hose</li>
<li>5 x Amphenol Surlok straight connector (selectable diameter)</li>
<li>1 x Inverter grounding wire</li>
</ul>
---FILES--- 
[Manuals] 
User manual REV.4 V1.2 === https://drive.google.com/file/d/12_XQR_gYO0YNasvg3SZ2IUfjVQkZUk0s/view?usp=sharing 
CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
[3D] 
HV-550 REV.4 CAD file === https://drive.google.com/file/d/12Oh7aHI6RBWXqomTpCJxbJ4bwtpSgvrx/view?usp=share_link 
[Firmware] 
DTI firmware 5.0 (CAN tool 1.40) === https://drive.google.com/file/d/1uPPmC6M78wEf0uILwRBV3NvFjxg8Hney/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view

DTI HV-550 liquid cooled inverter base kit

DTI HV-550 liquid cooled inverter with necessary accessories

dti ZapDrive motor controller electric drive package introduces best in-class power to weight ratio units for 400-800V propulsion and traction systems. Due to the high scalability multiple variants are available in order to suit the most for the specific use-case in the range of 110kW to 420kW per drive. The kit is pre-configured and works plug and play with the provided motor. After a wiring-up and an automated encoder calibration process the drive is ready to operate.
The zapDrive-x 800-420 is specifically engineered for 800V dc link bus applications with a peak rating of 420kW and continous rating of 180kW provided by a sigle motor and a dual controller.
Key features: 
<ul>
<li>Recommended DC link voltage: 800Vdc (720V nominal)
<li>RPM range: 0-4500 RPM
<li>Peak Torque: 1000Nm
<li>Peak Power rating (at nominal voltage): 420kW
<li>Continuous power rating: 180kW
<li>Summarized weight of the kit is 55,8kgs
</ul>
Recommended applications: 
<ul>
<li>Trawler, yacht
<li>Sport boat
<li>ATV/Quad
<li>Race car, hypercar
<li>Motorsports
<li>Sport boat
<li>Light Sport aircrafts
</ul>
The package includes:
<ul>
<li>2x DTI HV-550 motor controller unit
<li>1x custom Emrax motor
<li>DTI-COM Diagnostic tool
<li>10x HV connector for 50mm2 cable
<li>6x M6 X 50mm2 cable lug
<li>Motor position sensor with assembled connector
<li>Encoder splitter for dual inverter application
<li>2x LV wiring hanress
<li>3x shielding braid
<li>Hose clamps
</ul>
The package does not come with a HV cable, this can be ordered separately, optionally with a complete assembly service.
---FILES--- 
[Manuals] 
zapDrive-x 800-420 V1.0 === https://drive.google.com/file/d/19QG52NeT3HYsV6ELZxiBZoaxE1ewBshR/view?usp=share_link

348 double illustration_extend

zapDrive-x 800-420 electric drive kit

dti ZapDrive motor controller electric drive package introduces best in-class power to weight ratio units for 400-800V propulsion and traction systems. Due to the high scalability multiple variants are available in order to suit the most for the specific use-case in the range of 110kW to 420kW per drive. The kit is pre-configured and works plug and play with the provided motor. After a wiring-up and an automated encoder calibration process the drive is ready to operate.
The zapDrive-x 400-140 is specifically engineered for 400V dc link bus applications with a peak rating of 140kW and continous rating of 56kW provided by a sigle motor and a single controller.
Key features: 
<ul>
<li>Recommended DC link voltage: 400Vdc (360V nominal)
<li>RPM range: 0-6500 RPM
<li>Peak Torque: 230Nm
<li>Peak Power rating (at nominal voltage): 140kW
<li>Continuous power rating: 56kW
<li>Summarized weight of the kit is 19,8kgs
</ul>
Recommended applications: 
<ul>
<li>Small tenders
<li>ATV/Quad
<li>Motorbike
<li>Passenger vehicles
<li>Motorsports (with multiple drives)
<li>Jet-Ski (and other watercrafts)
<li>UL aircrafts
</ul>
The package includes:
<ul>
<li>1x DTI HV-850 motor controller unit
<li>1x custom Emrax motor
<li>DTI-COM Diagnostic tool
<li>5x HV connector for 70mm2 cable
<li>3x M8 X 70mm2 cable lug
<li>Motor position sensor with assembled connector
<li>1x LV wiring hanress
<li>2x shielding braid
<li>Hose clamps
</ul>
The package does not come with a HV cable, this can be ordered separately, optionally with a complete assembly service.
---FILES--- 
[Manuals] 
zapDrive-x 400-140 V1.0 === https://drive.google.com/file/d/19WUXL7VU7CtWiYNGnRIf3wpoKwgLu1vW/view?usp=share_link

228 single illustration_extend

zapDrive-x 400-140 electric drive kit

The DTI HV-850 is a universal PMSM motor controller rated for up to 800Vdc battery voltage and 600 Arms current. The inverter introduces an easy-to configure lightweight solution for multiple use-cases, for example vehicles, watercraft, and battery-powered machines. Numerous limiting and protection features have been implemented for improved safety. The HV-550 is available with integrated liquid cooling.
HV-850 inverter main specifications:
<ul>
<li>Maximum AC current: 850 Apk (600 Arms)</li>
<li>Input DC voltage: 30-800 Vdc</li>
<li>Maximum output power: 320 Kw</li>
<li>Maximum output AC frequency: 1,66 Khz </li>
<li>Switching frequency: 8-14 Khz</li>
</ul>
---FILES--- 
[Manuals] 
User manual REV.4 V1.2 === https://drive.google.com/file/d/12_XQR_gYO0YNasvg3SZ2IUfjVQkZUk0s/view?usp=sharing 
CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
[3D] 
HV-850 REV.4 CAD file === https://drive.google.com/file/d/12Oh7aHI6RBWXqomTpCJxbJ4bwtpSgvrx/view?usp=share_link 
[Firmware] 
DTI firmware 5.0 (CAN tool 1.40) === https://drive.google.com/file/d/1uPPmC6M78wEf0uILwRBV3NvFjxg8Hney/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view

HV-550 LC AC side

HV-550 LC DC side

DTI HV-850 liquid cooled

DTI HV-850 water-cooled high performance 3-phase traction motor inverter.

The DTI HV-550 is a universal PMSM motor controller rated for up to 800Vdc battery voltage and 390Arms current. The inverter introduces an easy-to configure lightweight solution for multiple use-cases, for example vehicles, watercraft, and battery-powered machines. Numerous limiting and protection features have been implemented for improved safety. The HV-550 is available with integrated liquid cooling.
HV-550 inverter main specifications:
<ul>
<li>Maximum AC current: 550 Apk (390 Arms)</li>
<li>Input DC voltage: 30-800 Vdc</li>
<li>Maximum output power: 320 Kw</li>
<li>Maximum output AC frequency: 1,66 Khz </li>
<li>Switching frequency: 8-14 Khz</li>
</ul>
---FILES--- 
[Manuals] 
User manual REV.4 V1.2 === https://drive.google.com/file/d/12_XQR_gYO0YNasvg3SZ2IUfjVQkZUk0s/view?usp=sharing 
CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
[3D] 
HV-550 REV.4 CAD file === https://drive.google.com/file/d/12Oh7aHI6RBWXqomTpCJxbJ4bwtpSgvrx/view?usp=share_link 
[Firmware] 
DTI firmware 5.0 (CAN tool 1.40) === https://drive.google.com/file/d/1uPPmC6M78wEf0uILwRBV3NvFjxg8Hney/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view

DTI HV-550 liquid cooled

DTI HV-550 water-cooled high performance 3-phase traction motor inverter.

The DTI HV-500 liquid cooled inverter kit contains basic components which are needed for using the inverter for first use.
DTI HV-500 liquid cooled inverter kit contains:
<ul>
<li>1 x DTI HV-500 liquid cooled version</li>
<li>1 x DTI COM diagnostic tool</li>
<li>1 x OBD connector for diagnostic connection</li>
<li>1 x Main wiring harness for single HV-500 operation</li>
<li>1 x Motor position sensor connector - SOURIAU UTS6JC12E14P</li>
<li>1 x User manual USB flash drive</li>
<li>2 x Pipe clamp for hose</li>
<li>5 x Amphenol Surlok straight connector (selectable diameter)</li>
<li>1 x Inverter grounding wire</li>
</ul>
---FILES--- 
[Manuals] 
HV-500 user manual IH3xxxxx === https://drive.google.com/file/d/1YmuKWoceJfPi1yLu9l6GSZ0Io05rac8O/view 
HV-500 CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
HV-500 CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
HV-500 CAN manual 2.2 === https://drive.google.com/file/d/1G0jMXhlOHe0cf9Yko3sAsGUb_wzRxvuG/view 
HV-500 CAN manual 2.1 === https://drive.google.com/file/d/1G2KWq1YkLpOkoB8vVjZNFfXnKu9NwFge/view 
HV-500 CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
HV-500 CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
DTI Firmware upgrade manual === https://drive.google.com/file/d/1GXarg2EpWysgqpBIHVehF13vBniWkYyW/view?usp=share_link 
[3D] 
HV-500LC IH3xxxxx step file === https://drive.google.com/file/d/17wPYA4XPdXDASB0d3MhRfOJxzuu6zBoZ/view 
[Firmware] 
DTI Firmware Tool 1.22 === https://drive.google.com/file/d/1FITPnz3UF1qS6TKuESVXWJ2TN96_mW9-/view 
DTI firmware 4.6 (CAN tool 1.40) === https://drive.google.com/file/d/19HDBolDNijb_p3FYGD7OplKCVtSbCJHS/view 
DTI firmware 4.51 (CAN tool 1.31) === https://drive.google.com/file/d/1LhQPp3Cce__Mq90oBvzKKCigVkzp4is2/view 
DTI firmware 4.50 (CAN tool 1.30) === https://drive.google.com/file/d/1ORGX8zFU--xyNqL4lOvpHZ0F7Y9TqMbD/view 
DTI firmware 4.40 (CAN tool 1.20) === https://drive.google.com/file/d/1QtSQRBrjsgFPk-eBRcU_eIdhLSWT-jYB/view 
DTI firmware 4.37 (CAN tool 1.10) === https://drive.google.com/file/d/17dAAzAAfd0woz-1D-F18QPRUZP_AXSqE/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view 
DTI CAN Tool 1.31 === https://drive.google.com/file/d/1-D_HLUARhQNWVRqduzD9SahMdUZ991Un/view 
DTI CAN Tool 1.30 === https://drive.google.com/file/d/1OLEOZRpS5PDFUIJGIXp2-1FIV0IE2ecU/view 
DTI CAN Tool 1.20 === https://drive.google.com/file/d/1NYJI-PsuC-T60d2W9CVRLJgP2CTx9wdi/view 
DTI CAN Tool 1.10 === https://drive.google.com/file/d/1H-JwqpMDkpFbNwRQl9j9nsslp5h-IZma/view

DTI HV-500 liquid cooled inverter base kit

DTI HV-500 liquid cooled inverter with necessary accessories

RLS RM44SI 13-bit encoder with mounted HV-500 compatible connector. Cable length 1 meter.
Connector types:
<ul>
<li>26 pin High density (3 row) D-Sub, male</li>
<li>SOURIAU UTS6JC12E14P</li>
</ul>
---FILES--- 
[Manuals] 
RLS RM44 data sheet === https://drive.google.com/file/d/148qYyh8skifdJhtXjJEZ_FIaitjl7Fa6/view?usp=sharing 
[3D] 
RLS RM44 data 3D files=== https://drive.google.com/file/d/14DIRtAsurmFxQIxlmX178TthNdCCtrBm/view?usp=sharing 
SOURIAU UTS6JC12E14P step file === https://drive.google.com/file/d/13LHYwUtImg2ecLQHKeDsMTwg12A614gu/view?usp=sharing 
[Drawing] 
RLS RM44 drawing === https://drive.google.com/file/d/14hMdQ6Tp4DbDRpWC7hWyahK4mUwPyL1k/view?usp=sharing 
SOURIAU UTS6JC12E14P drawing === https://drive.google.com/file/d/13DxXYGOiavGe-Ruv-ZXqcllvbTGeCe-T/view?usp=sharing

RLS RM44SI with inverter connector

RLS RM44SI with splitter connector

RLS RM44SI without connector

RM44SI 13Bit Encoder

RLS RM44SI 13-bit encoder with mounted HV-500 compatible connector.

High-voltage cable assembled with connectors for AC and DC side.
Coroflex 9-2611 FHLR2GCB2G 70 mm2 shielded high voltage cable for EV applications with optional cable connector ends.
Coroflex 70 mm2 high voltage cable parameters:
<ul>
<li>Outer diameter: 18,2 mm</li>
<li>Colour: orange (RAL 2003)</li>
<li>Nominal voltage (AC /DC): max 600V / 1000 V</li>
<li>Weight: 880 g / m</li>
<li>Operating temperature: -40 C° - +180 C°</li>
<li>Sheath material: Silicon rubber</li>
</ul>
Connector types:
<ul>
<li>Amphenol Surlok high power connector - right angle, straight</li>
<li>M8 cable lug - WE 5580870</li>
<li>M10 cable lug - WE 5581070</li>
</ul>
---FILES--- 
[Manuals] 
Coroflex 70mm2 === https://drive.google.com/file/d/15XnnXcqy6GcCvlMZ4Zrh4dKwBg1NIcdz/view?usp=sharing 
Amphenol surlok right angle drawing === https://drive.google.com/file/d/1ch31IgUhoBepKL-fcEngepIuSuHNOgn6/view?usp=sharing 
Amphenol surlok straight drawing === https://drive.google.com/file/d/1ctwJODhwGaZmC6d5f18_5osB9zPMo4iP/view?usp=sharing 
WE 5580870 Tubular Cable Lug === https://drive.google.com/file/d/164AJjrx5HEzOVviicmd4kl3yy7kMV2x1/view?usp=sharing 
WE 5581070 Tubular Cable Lug === https://drive.google.com/file/d/169yofgzs4VZjrTxqIxf-Ekqi-Xsl9lNG/view?usp=sharing 
[3D] 
Amphenol surlok right angle step file === https://drive.google.com/file/d/1chFY0wS0Jh0fGDewxExk0kifLIwWg3oY/view?usp=sharing 
Amphenol surlok straight step file === https://drive.google.com/file/d/1cvqmIDGMNssPjHNAAzmo4UimiilrKLcn/view?usp=sharing 
WE 5580870 Tubular Cable Lug step file === https://drive.google.com/file/d/15yHnhjoe5BEWqn4vZbGMXZTAS6Vtt6jr/view?usp=sharing 
WE 5581070 Tubular Cable Lug step file === https://drive.google.com/file/d/16E2jFxER6As2QOLhXu3VoL8fXBsYvo_9/view?usp=sharing

Coroflex assembly

Coroflex S &#8211; N

Coroflex S &#8211; CL

Coroflex RA &#8211; N

Coroflex RA &#8211; CL

Coroflex 70 mm2 high voltage cable assembly

Coroflex cable assembly with Amphenol surlok connector and cable lug

High-voltage cable assembled with connectors for AC and DC side.
Coroflex 9-2611 FHLR2GCB2G 50 mm2 shielded high voltage cable for EV applications with optional cable connector ends.
Coroflex 50 mm2 high voltage cable parameters:
<ul>
<li>Outer diameter: 15,8 mm</li>
<li>Colour: orange (RAL 2003)</li>
<li>Nominal voltage (AC /DC): max 600V / 1000 V</li>
<li>Weight: 630 g / m</li>
<li>Operating temperature: -40 C° - +180 C°</li>
<li>Sheath material: Silicon rubber</li>
</ul>
Connector types:
<ul>
<li>Amphenol Surlok high power connector - right angle, straight</li>
<li>M6 cable lug - WE 5580635</li>
<li>M8 cable lug - WE 5580835</li>
</ul>
---FILES--- 
[Manuals] 
Coroflex 50mm2 === https://drive.google.com/file/d/15_aVPDLmQj2Ro8lxaPq9--tOtU3OnuTP/view?usp=sharing 
Amphenol surlok right angle drawing === https://drive.google.com/file/d/1ch31IgUhoBepKL-fcEngepIuSuHNOgn6/view?usp=sharing 
Amphenol surlok straight drawing === https://drive.google.com/file/d/1ctwJODhwGaZmC6d5f18_5osB9zPMo4iP/view?usp=sharing 
WE 5580635 Tubular Cable Lug === https://drive.google.com/file/d/15HjxQrB9b88TVp7OJC2yUcoGL6bQCRg9/view?usp=sharing 
WE 5580835 Tubular Cable Lug === https://drive.google.com/file/d/15iZ6OU4KGM6xYTaPVVPww8oSFGHXj5o7/view?usp=sharing 
[3D] 
Amphenol surlok right angle step file === https://drive.google.com/file/d/1chFY0wS0Jh0fGDewxExk0kifLIwWg3oY/view?usp=sharing 
Amphenol surlok straight step file === https://drive.google.com/file/d/1cvqmIDGMNssPjHNAAzmo4UimiilrKLcn/view?usp=sharing 
WE 5580635 Tubular Cable Lug step file === https://drive.google.com/file/d/15Izir7RfLxituWSlxdNlWzxuVkcxj-N4/view?usp=sharing 
WE 5580835 Tubular Cable Lug step file === https://drive.google.com/file/d/15g5Am89M-hGNCq-b7i2R82CbrqT2IzSl/view?usp=sharing

Coroflex 50 mm2 high voltage cable assembly

High-voltage cable assembled with connectors for AC and DC side.
Coroflex 9-2611 FHLR2GCB2G 35 mm2 shielded high voltage cable for EV applications with optional cable connector ends.
Coroflex 35 mm2 high voltage cable parameters:
<ul>
<li>Outer diameter: 14,4 mm
<li>Colour: orange (RAL 2003)
<li>Nominal voltage (AC /DC): max 600V / 1000 V
<li>Weight: 485 g / m
<li>Operating temperature: -40 C° - +180 C°
<li>Sheath material: Silicon rubber
</ul>
Connector types:
<ul>
<li>Amphenol Surlok high power connector - right angle, straight</li>
<li>M6 cable lug - WE 5580635</li>
<li>M8 cable lug - WE 5580835</li>
</ul>
---FILES--- 
[Manuals] 
Coroflex 35mm2 === https://drive.google.com/file/d/15PgN402j4Mtqu4_YzpRdmLrnTf7_K_hM/view?usp=sharing 
Amphenol surlok right angle drawing === https://drive.google.com/file/d/1ch31IgUhoBepKL-fcEngepIuSuHNOgn6/view?usp=sharing 
Amphenol surlok straight drawing === https://drive.google.com/file/d/1ctwJODhwGaZmC6d5f18_5osB9zPMo4iP/view?usp=sharing 
WE 5580635 Tubular Cable Lug === https://drive.google.com/file/d/15HjxQrB9b88TVp7OJC2yUcoGL6bQCRg9/view?usp=sharing 
WE 5580835 Tubular Cable Lug === https://drive.google.com/file/d/15iZ6OU4KGM6xYTaPVVPww8oSFGHXj5o7/view?usp=sharing 
[3D] 
Amphenol surlok right angle step file === https://drive.google.com/file/d/1chFY0wS0Jh0fGDewxExk0kifLIwWg3oY/view?usp=sharing 
Amphenol surlok straight step file === https://drive.google.com/file/d/1cvqmIDGMNssPjHNAAzmo4UimiilrKLcn/view?usp=sharing 
WE 5580635 Tubular Cable Lug step file === https://drive.google.com/file/d/15Izir7RfLxituWSlxdNlWzxuVkcxj-N4/view?usp=sharing 
WE 5580835 Tubular Cable Lug step file === https://drive.google.com/file/d/15g5Am89M-hGNCq-b7i2R82CbrqT2IzSl/view?usp=sharing

Coroflex 35 mm2 high voltage cable assembly

Coroflex 9-2611 FHLR2GCB2G 70 mm2 shielded high voltage cable for EV applications
<ul>
<li>Outer diameter: 18,2 mm</li>
<li>Colour: orange (RAL 2003)</li>
<li>Nominal voltage (AC /DC): max 600V / 1000 V</li>
<li>Weight: 880 g / m</li>
<li>Operating temperature: -40 C° - +180 C°</li>
<li>Sheath material: Silicon rubber</li>
</ul>
For more information, please check datasheet
The quantity must be given in meters 
---FILES--- 
[Manuals] 
Coroflex 70mm2 === https://drive.google.com/file/d/15XnnXcqy6GcCvlMZ4Zrh4dKwBg1NIcdz/view?usp=sharing

Coroflex high voltage cable

Coroflex 70 mm2 shielded high voltage cable

Coroflex 9-2611 FHLR2GCB2G 70 mm2 shielded high voltage cable for EV applications

Coroflex 9-2611 FHLR2GCB2G 50 mm2 shielded high voltage cable for EV applications
<ul>
<li>Outer diameter: 15,8 mm</li>
<li>Colour: orange (RAL 2003)</li>
<li>Nominal voltage (AC /DC): max 600V / 1000 V</li>
<li>Weight: 630 g / m</li>
<li>Operating temperature: -40 C° - +180 C°</li>
<li>Sheath material: Silicon rubber</li>
</ul>
For more information, please check datasheet
The quantity must be given in meters 
---FILES--- 
[Manuals] 
Coroflex 50mm2 === https://drive.google.com/file/d/15_aVPDLmQj2Ro8lxaPq9--tOtU3OnuTP/view?usp=sharing

Coroflex 50 mm2 shielded high voltage cable

Coroflex 9-2611 FHLR2GCB2G 50 mm2 shielded high voltage cable for EV applications

Coroflex 9-2611 FHLR2GCB2G 35 mm2 shielded high voltage cable for EV applications
<ul>
<li>Outer diameter: 14,4 mm</li>
<li>Colour: orange (RAL 2003)</li>
<li>Nominal voltage (AC /DC): max 600V / 1000 V</li>
<li>Weight: 485 g / m</li>
<li>Operating temperature: -40 C° - +180 C°</li>
<li>Sheath material: Silicon rubber</li>
</ul>
For more information, please check datasheet
The quantity must be given in meters 
---FILES--- 
[Manuals] 
Coroflex 35mm2 === https://drive.google.com/file/d/15PgN402j4Mtqu4_YzpRdmLrnTf7_K_hM/view?usp=sharing

Coroflex 35 mm2 shielded high voltage cable

Coroflex 9-2611 FHLR2GCB2G 35 mm2 shielded high voltage cable for EV applications

M6, M8 and M10 cable lug for 35, 50 and 70 mm2 cable.
<table style="width: 300px">
<tbody>
<tr>
<th>Size</th>
<th>Type</th>
</tr>
<tr>
<th>M6 - 35mm2</th>
<th>WE 5580635</th>
</tr>
<tr>
<th>M6 - 50mm2</th>
<th>HAUPA-290976</th>
</tr>
<tr>
<th>M8 - 35mm2</th>
<th>WE 5580835</th>
</tr>
<tr>
<th>M8 - 50mm2</th>
<th>WE 5580850</th>
</tr>
<tr>
<th>M8 - 70mm2</th>
<th>WE 5580870</th>
</tr>
<tr>
<th>M10 - 50mm2</th>
<th>WE 5581050</th>
</tr>
<tr>
<th>M10 - 70mm2</th>
<th>WE 5581070</th>
</tr>
</tbody>
</table>
---FILES--- 
[Manuals] 
Würth WA-CLUG Tubular Cable Lug - WE 5580635 === https://drive.google.com/file/d/15HjxQrB9b88TVp7OJC2yUcoGL6bQCRg9/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580835 === https://drive.google.com/file/d/15iZ6OU4KGM6xYTaPVVPww8oSFGHXj5o7/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580850 === https://drive.google.com/file/d/15xZ3eB05XQ3gepXPNp4acD_5dm8YJ8T1/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580870 === https://drive.google.com/file/d/164AJjrx5HEzOVviicmd4kl3yy7kMV2x1/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5581050 === https://drive.google.com/file/d/166S0j_9sFPZKG2_iBHCqPjmN6OuGAECD/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5581070 === https://drive.google.com/file/d/169yofgzs4VZjrTxqIxf-Ekqi-Xsl9lNG/view?usp=sharing 
HAUPA Tubular Cable Lug === https://drive.google.com/file/d/15KoKqMJuyML009JSoTcNHkVEYxxYqCSX/view?usp=sharing 
[3D] 
Würth WA-CLUG Tubular Cable Lug - WE 5580635 step file === https://drive.google.com/file/d/15Izir7RfLxituWSlxdNlWzxuVkcxj-N4/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580835 step file === https://drive.google.com/file/d/15g5Am89M-hGNCq-b7i2R82CbrqT2IzSl/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580850 step file === https://drive.google.com/file/d/15oFclbfjBG9VLbyoC7s5iBJBQj0qGg9K/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5580870 step file === https://drive.google.com/file/d/15yHnhjoe5BEWqn4vZbGMXZTAS6Vtt6jr/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5581050 step file === https://drive.google.com/file/d/167arTE82_kSqwWtjRYcm2CxSi8QnMn2w/view?usp=sharing 
Würth WA-CLUG Tubular Cable Lug - WE 5581070 step file === https://drive.google.com/file/d/16E2jFxER6As2QOLhXu3VoL8fXBsYvo_9/view?usp=sharing

cable_lug

Cable lug

Cable lug for high voltage cables

Amphenol surlok high power connector suitable for using with DTI high voltage inverters.
The connector is available in the following diameters:
<ul>
<li>35 mm2</li>
<li>50 mm2</li>
<li>70 mm2</li>
</ul>
---FILES--- 
[Manuals] 
Amphenol surlok right angle drawing === https://drive.google.com/file/d/1ch31IgUhoBepKL-fcEngepIuSuHNOgn6/view?usp=sharing 
[3D] 
Amphenol surlok right angle 3D step === https://drive.google.com/file/d/1chFY0wS0Jh0fGDewxExk0kifLIwWg3oY/view?usp=sharing

Surlok right angle

Amphenol surlok right angle connecotr

Amphenol Surlok high power connector - right angle

High power connectors for DTI inverters

Amphenol surlok high power connector suitable for using with DTI high voltage inverters.
The connector is available in the following diameters:
<ul>
<li>35 mm2</li>
<li>50 mm2</li>
<li>70 mm2</li>
</ul>
---FILES--- 
[Manuals] 
Amphenol surlok straight drawing === https://drive.google.com/file/d/1ctwJODhwGaZmC6d5f18_5osB9zPMo4iP/view?usp=sharing 
[3D] 
Amphenol surlok straight 3D step === https://drive.google.com/file/d/1cvqmIDGMNssPjHNAAzmo4UimiilrKLcn/view?usp=sharing

Surlok straight

surlok3

Amphenol Surlok high power connector - straight

1.5m cable between controller and resolver interface/encoder splitter with appropriate connectors at both ends.

Resolver interface &#8211; Encoder splitter cable

Encoder splitter / Resolver interface cable

1.5m cable between controller and resolver interface/encoder splitter.

Low voltage hv-500 inverter harness kit for single inverter operation.
Kit includes:
<ul>
<li>TE Connectivity Ampseal receptacle (770680-1) (Low voltage harness connector)</li>
<li>23 pcs crimped wire</li>
<li>Molex MX-51115-1601 (OBD connector)</li>
<li>3 pcs termination resistor</li>
</ul>
Suitable for DTI HV-500 inverter.

Single inverter low voltage harness

Wire side connector for connecting the motor sensor to the inverter.
Type of connector:
<ul>
<li>SOURIAU UTS6JC12E14P</li>
</ul>
---FILES--- 
[3D] 
SOURIAU UTS6JC12E14P step file === https://drive.google.com/file/d/13LHYwUtImg2ecLQHKeDsMTwg12A614gu/view?usp=sharing 
[Drawing] 
SOURIAU UTS6JC12E14P drawing === https://drive.google.com/file/d/13DxXYGOiavGe-Ruv-ZXqcllvbTGeCe-T/view?usp=sharing

DTI Inverter motor sensor connector

Wire side connector for connecting the motor sensor to the inverter

Harness side connector kit for diagnostic.
Kit includes:
<ul>
<li>Molex MX-51115-1601</li>
<li>4 pcs Molex 50420-8000</li>
</ul>
Suitable for DTI HV-500 inverter.

mx-51115-1601

OBD pin

OBD connector

Pipe clamp for connecting the water cooling pipe to the cooling outlets.
<ul>
<li>Clamp width: 9 mm</li>
<li>Clamp diameter range: 12 - 22 mm</li>
<li>Clamp material: W1/S10 - galvanized steel</li>
</ul>

Pipe clamp

Pipe clamp for connecting water cooling

The DTI HV-500 is a universal PMSM motor controller rated for up to 800Vdc battery voltage and 350Arms current. The inverter introduces an easy-to configure lightweight solution for multiple use-cases, for example vehicles, watercraft, and battery-powered machines. Numerous limiting and protection features have been implemented for improved safety. The HV-500 is available in three variants, equipped with liquid cooling, active air cooling and passive air cooling. The aircooled variants may have less continuous current rating due to the cooling efficiency. Passive cooled variants require external air exchange designed by the integrator for a specific use-case.
---FILES--- 
[Manuals] 
HV-500 user manual IH3xxxxx === https://drive.google.com/file/d/1YmuKWoceJfPi1yLu9l6GSZ0Io05rac8O/view 
HV-500 user manual IH2xxxxx === https://drive.google.com/file/d/1Qb-Vr-mzTKY7upoUvhn79vaFOYdausjm/view 
HV-500 user manual IH1xxxxx === https://drive.google.com/file/d/1GMio8R33BOzLPKmAh3uyEVa7ujhKxuBD/view 
HV-500 CAN manual 2.4 === https://drive.google.com/file/d/18WqW30AykNudS3VukyKqq-GsveZrWgq1/view?usp=sharing 
HV-500 CAN manual 2.3 === https://drive.google.com/file/d/1XwL7rdQBQ7feo0aQrrRIpNbMYhYFmUrn/view 
HV-500 CAN manual 2.2 === https://drive.google.com/file/d/1G0jMXhlOHe0cf9Yko3sAsGUb_wzRxvuG/view 
HV-500 CAN manual 2.1 === https://drive.google.com/file/d/1G2KWq1YkLpOkoB8vVjZNFfXnKu9NwFge/view 
HV-500 CAN dbc for v2.4 === https://drive.google.com/file/d/1Ab0_CAaa5hfugyvFDeBGb3mmrNucd-Ci/view 
HV-500 CAN dbc for v2.3 === https://drive.google.com/file/d/18ms5on2rmSzTZq7prMhQHSITwIrdMJw2/view 
DTI Firmware upgrade manual === https://drive.google.com/file/d/1GXarg2EpWysgqpBIHVehF13vBniWkYyW/view?usp=share_link 
[3D] 
HV-500LC IH3xxxxx step file === https://drive.google.com/file/d/17wPYA4XPdXDASB0d3MhRfOJxzuu6zBoZ/view 
[Firmware] 
DTI Firmware Tool 1.22 === https://drive.google.com/file/d/1FITPnz3UF1qS6TKuESVXWJ2TN96_mW9-/view 
DTI firmware 4.6 (CAN tool 1.40) === https://drive.google.com/file/d/19HDBolDNijb_p3FYGD7OplKCVtSbCJHS/view 
DTI firmware 4.51 (CAN tool 1.31) === https://drive.google.com/file/d/1LhQPp3Cce__Mq90oBvzKKCigVkzp4is2/view 
DTI firmware 4.50 (CAN tool 1.30) === https://drive.google.com/file/d/1ORGX8zFU--xyNqL4lOvpHZ0F7Y9TqMbD/view 
DTI firmware 4.40 (CAN tool 1.20) === https://drive.google.com/file/d/1QtSQRBrjsgFPk-eBRcU_eIdhLSWT-jYB/view 
DTI firmware 4.37 (CAN tool 1.10) === https://drive.google.com/file/d/17dAAzAAfd0woz-1D-F18QPRUZP_AXSqE/view 
[CANtool] 
DTI CAN Tool 1.40 === https://drive.google.com/file/d/19CMK0gTMaD-9akpVYBEWJH2vwVCYP_5S/view 
DTI CAN Tool 1.31 === https://drive.google.com/file/d/1-D_HLUARhQNWVRqduzD9SahMdUZ991Un/view 
DTI CAN Tool 1.30 === https://drive.google.com/file/d/1OLEOZRpS5PDFUIJGIXp2-1FIV0IE2ecU/view 
DTI CAN Tool 1.20 === https://drive.google.com/file/d/1NYJI-PsuC-T60d2W9CVRLJgP2CTx9wdi/view 
DTI CAN Tool 1.10 === https://drive.google.com/file/d/1H-JwqpMDkpFbNwRQl9j9nsslp5h-IZma/view

DTI HV-500 liquid cooled

DTI HV-500 water-cooled high performance 3-phase traction motor inverter.

Harness side connector set for inverter supply and signals
Kit includes:
<ul>
<li>TE Connectivity Ampseal receptacle (770680-1)</li>
<li>23 pcs pins (770520-1)</li>
</ul>
Suitable for DTI HV-500 inverter.
---FILES--- 
[Drawing] 
TE Connectivity Ampseal receptacle drawing === https://drive.google.com/file/d/1cQT8-gtSXFTsBMjl0X91y0MoA4biHM2F/view?usp=sharing 
[3D] 
TE Connectivity Ampseal receptacle step file === https://drive.google.com/file/d/1cQ5Zgc6MH8rRChu8dgqe0GTR6409cIxc/view?usp=sharing

TE Connectivity Ampseal receptacle (770680-1)

TE Connectivity Ampseal receptacle (770680-1) 2

DTI inverter harness connector set

Harness side connector kit for inverter supply and signals

Encoder splitter for double inverter operation. It splits the signal from one encoder to two controllers
---FILES--- 
[Manuals] 
DTI Encoder splitter User manual === https://drive.google.com/file/d/17mrlTZzKh2EaMzrPgPYyDAm3tMHlpusd/view

Encoder splitter_back

Encoder splitter_front

Encoder splitter

Encoder splitter for double inverter operation.

HV-500 active aircooled

DTI HV-500 passive aircooled

DTI HV-500 passive air-cooled, high-performance 3-phase traction motor inverter.

DTI HV-500 active aircooled

DTI HV-500 active air-cooled, high-performance 3-phase traction motor inverter.

To make our system more universal, you can use a resolver interface which is directly connected to the inverter. The interface is a complete 12-bit resolution tracking resolver-to-digital converter. There are applications where you have to use a resolver to measure the correct position.
Compatible with 2 pole resolver. 
(for example TS2620N21E11)
---FILES--- 
[Manuals] 
DTI Resolver interface user manual === https://drive.google.com/file/d/1GZq2Oa2JT9RqPO22mIZHgds_Rq30noEE/view

sensors-and-interfaces

Resolver interface

Diagnostic tool from DTI.
A tool for updating firmware, sending and receiving data, and configuring devices.
---FILES--- 
[Manuals] 
DTI COM Diagnostic Tool User manual === https://drive.google.com/file/d/17m9xC_VkkBeOjh6bKPrUH6ohZeDDQieM/view 
DTI Firmware upgrade manual === https://drive.google.com/file/d/1GXarg2EpWysgqpBIHVehF13vBniWkYyW/view?usp=share_link

Our Products